Epoxy Flooring Cost in NJ, NY and CT
In New Jersey, a professionally installed flake epoxy garage floor from Epoxy Floor Now typically costs $5.50 to $8.50 per square foot. A 450 square foot two-car garage typically runs $2,500 to $3,825. Commercial epoxy with a urethane topcoat typically runs $3.50 to $8 per square foot. Urethane cement, used in commercial kitchens and food areas, typically runs $13 to $20 per square foot. Every quote includes mechanical surface prep and crack repair, estimates are free, and projects start at $2,500. Very small jobs can cost much more per square foot because of that minimum and the setup involved.
Prices last updated November 2026. These are typical ranges, not quotes.
We install systems from Sika Floors, Sherwin-Williams, Koster, Neogard, Elite Crete and Simiron, and we match the product to the space. Call (201) 365-0003 or request a quote online for a free on-site estimate in New Jersey, New York and Connecticut. We're fully insured.
Most epoxy and concrete coating projects we install run from $2.50 to $20 per square foot, depending on the system. Below is what each system typically costs, with an example so you can see the price per square foot and the total together. Projects start at $2,500.
Typical Price Ranges by System
-
Full flake garage floor: $5.50 to $8.50 per sq ft. A 450 sq ft two-car garage typically runs $2,500 to $3,825.
-
Metallic epoxy: $10 to $16 per sq ft. A 500 sq ft floor typically runs $5,000 to $8,000.
-
Commercial epoxy with a urethane topcoat: $3.50 to $8 per sq ft. A 5,000 sq ft floor typically runs $17,500 to $40,000.
-
Urethane cement: $13 to $20 per sq ft. A 1,500 sq ft commercial kitchen typically runs $19,500 to $30,000.
-
Polished concrete: $5 to $10 per sq ft. A 2,000 sq ft floor typically runs $10,000 to $20,000.
-
Grind and seal: $2.50 to $5 per sq ft. A 2,000 sq ft floor typically runs $5,000 to $10,000.
These are typical ranges, not quotes. Every project gets a free on-site estimate.
What Moves the Price
-
Size. Larger floors cost less per square foot. Floors under about 500 sq ft cost more per square foot, and every project has a $2,500 minimum.
-
Condition of the concrete. Cracks, pitting, old coatings and uneven slabs add prep and repair.
-
Moisture. Slabs with moisture need a vapor barrier before the coating goes down.
-
The system. Flake, metallic, solid color, urethane cement and polished concrete use different materials and labor.
-
Details. Cove base, safety lines, stairs, and night or weekend scheduling are priced per job.
Basements that need a moisture barrier, balconies and other specialty work are priced after a site visit.
What Is Included
Every job starts with mechanical surface prep and crack and joint repair. Our standard flake garage floors are sealed with a polyaspartic floor coating as the topcoat. Every floor is backed by a 5 to 15 year warranty, depending on the system.
Common Questions
How much does it cost to epoxy a two-car garage?
A full flake floor in a 450 sq ft two-car garage typically runs $2,500 to $3,825, which is $5.50 to $8.50 per sq ft.
How much does commercial epoxy flooring cost per square foot?
Most commercial epoxy floors with a urethane topcoat run $3.50 to $8 per sq ft, so a 5,000 sq ft floor typically runs $17,500 to $40,000. Commercial kitchens that need urethane cement run $13 to $20 per sq ft.
Is there a minimum project size?
Yes. Projects start at $2,500.
Why do small floors cost more per square foot?
Prep equipment, travel and setup are about the same on a small floor as on a large one, so that cost is spread over fewer square feet.
Get an Exact Price
Call 201-365-0003 or request a free estimate. We serve New Jersey, New York and Connecticut. See our service areas.





