top of page

Polyaspartic Floor Coatings in NJ, NY and CT

A polyaspartic floor coating is the clear, UV-stable topcoat we use on our standard flake garage floors. It cures fast, stays clear in sunlight and stands up to hot tires, road salt and chemicals. A typical residential garage takes 2 days, and a full flake floor with a polyaspartic topcoat typically costs $5.50 to $8.50 per square foot, with a $2,500 project minimum.

 

 

Epoxy Floor Now has been installing floor coatings across New Jersey, New York and Connecticut since 2015.

 

What a Polyaspartic Coating Is

Polyaspartic is a fast-curing floor coating, most often used as the finish coat over epoxy. Compared with epoxy, it cures much faster, stays clear and color-stable in sunlight, and can be installed across a wider temperature range, including cold weather. As a topcoat, it gives excellent abrasion and chemical resistance.

 

How We Use Polyaspartic

Our standard flake epoxy garage floor is a hybrid system:

  • Epoxy basecoat, which builds thick and bonds into the prepared concrete

  • Full flake broadcast, spread to full coverage so no basecoat shows through

  • Clear polyaspartic topcoat, which locks in the flake and protects the floor from UV yellowing, hot tire pickup and chemicals

  • Optional second urethane topcoat for extra wear resistance

 

For some floors we recommend a full polyaspartic system instead. We inspect the slab first and recommend a system after a site visit, not over the phone.

 

Polyaspartic vs Epoxy

Neither one wins everywhere. Epoxy builds thickness and bonds hard to concrete. Polyaspartic resists UV, cures faster and stays clear in sunlight. For most garages, the best floor uses both: an epoxy base for bond and build, and a polyaspartic topcoat for wear and UV.

  • Cure time: Epoxy: Slower. Polyaspartic: Much faster.

  • UV stability: Epoxy: Can amber or yellow in sunlight. Polyaspartic: Stays clear and color-stable.

  • Chemical resistance: Epoxy: Good. Polyaspartic: Excellent as a topcoat.

  • Hot-tire pickup: Epoxy: More of a problem with thin DIY coatings and paint. Polyaspartic: Resists hot tire pickup as a topcoat, with proper prep.

  • Film build: Epoxy: Thick in one coat, which makes it a strong base layer. Polyaspartic: Thinner per coat.

  • Install temperature: Epoxy: Narrower range. Polyaspartic: Wider range, including cold weather.

  • Working time: Epoxy: Longer and more forgiving. Polyaspartic: Sets fast, so it takes an experienced crew.

  • Role in the system: Epoxy: Basecoat for bond and film build. Polyaspartic: Clear topcoat that locks in the flake and protects the floor. On some floors, a full polyaspartic system after a site visit.

 

That is why many garages get both. Read the full comparison in Polyaspartic vs Epoxy Garage Floors.

 

Why a Polyaspartic Garage Floor Coating Takes 2 Days

You will see "one-day garage floor" offers when you search for polyaspartic. We do not install a typical residential garage in one day, and we do not claim to.

 

A typical residential garage takes 2 days. Day one is surface prep, the epoxy basecoat and the flake broadcast. Day two is the clear polyaspartic topcoat. You can walk on the floor the day after we finish, and drive on it 48 hours after the install.

 

We take the second day so the basecoat and flake can set before the clear topcoat goes down, and so we have time to grind the slab, repair cracks and check the floor before anything is coated. The polyaspartic is what lets you get back in the garage quickly after that topcoat is down. We confirm exact times for your floor.

 

What It Costs

A full flake garage floor with a polyaspartic topcoat typically runs $5.50 to $8.50 per square foot, and every project has a $2,500 minimum. Here is what that looks like by garage size:

  • One-car garage, about 250 sq ft: $2,500, which is our project minimum (about $10 per sq ft)

  • Two-car garage, about 450 sq ft: $2,500 to $3,825 ($5.50 to $8.50 per sq ft)

  • Three-car garage, about 650 sq ft: $3,575 to $5,525 ($5.50 to $8.50 per sq ft)

 

These are typical ranges, not quotes. Cracks, pitting, old coatings and moisture can add prep. Every garage gets a free on-site estimate with an exact price. See our epoxy flooring cost guide and flake epoxy garage floors.

 

Commercial Polyaspartic Floors

Polyaspartic is not just for home garages. We also use polyaspartic and urethane topcoats on commercial flake and broadcast floors, including retail, labs, service areas and other spaces that need a durable finish and a planned return to service.

 

That includes:

  • Retail floors and other public spaces that need to look clean and take daily traffic

  • Service bays and auto shops, where the floor sees tires and fluids

  • Labs and production areas that need a seamless, easy-to-clean surface

  • Showrooms, where the finish has to hold up and still look sharp

 

Commercial jobs are scheduled around your operations, including nights and weekends when needed. We confirm when the floor is ready for foot traffic, equipment and vehicles. Learn more about our commercial and industrial flooring.

 

Real Floors We Have Installed

These are real Epoxy Floor Now jobs, already published on our site.

  • A 520 ft² full flake garage in Greenwich, CT, with a clear polyaspartic topcoat.

  • A 1,100 ft² pool deck in Paramus, NJ, installed with a full silica broadcast and polyaspartic. That job is listed on our Paramus and Bergen County pages.

  • Full flake garages in Franklin Lakes, NJ, at 400, 450 and 570 ft². Those used our standard flake system, including a clear polyaspartic topcoat, as listed on our Franklin Lakes and Saddle River page.

 

Here is what one homeowner said after a garage floor:

 

"The team showed up on time and finished the job on the day they promised it will be completed... They left the area clean around the garage and to my surprise was not much dust left on the walls." Eduard D.

 

See more customer reviews, or browse the project gallery.

 

Warranty

Our floors carry a 5 to 15 year warranty depending on the system installed. We spell out the exact coverage for your floor in your proposal.

 

Polyaspartic Floor Coating FAQ

How long does a polyaspartic floor last?

Every floor is backed by a 5 to 15 year warranty, depending on the system installed. Coverage is spelled out in your proposal. With proper prep and a polyaspartic topcoat, the floor is built for daily use, including hot tires, road salt and regular cleaning.

 

Does polyaspartic yellow in sunlight?

No. Polyaspartic stays clear and color-stable in sunlight. Epoxy can amber at the surface when it is left exposed to UV, which is why we use polyaspartic as the topcoat.

 

Is a polyaspartic floor slippery?

On a flake floor, the flakes add texture, so it has more grip than a smooth coating. For extra grip, we can add an anti-slip additive to the topcoat.

 

Can you install a floor in cold weather?

Yes. We can install in any temperature with the right products, and we pick the system for the conditions. Polyaspartic has a wider temperature range than epoxy, including cold weather, but it is not the right product for every cold space. For very cold areas, such as walk-in coolers, we use systems like MMA that are made to cure in those conditions. We inspect the space first and recommend the system after a site visit.

 

Can you put polyaspartic over an old coating?

Old paint or a failed coating has to be ground off so the new system can bond to the concrete. That prep is part of the job, and it can add to the price if there is a lot to remove. We look at the slab during the on-site estimate.

 

Do you test for moisture?

Yes, when the slab calls for it. Moisture coming up through concrete is a common reason coatings fail, so we check the slab and test where needed before we choose a system. If the slab needs moisture mitigation, we recommend that before coating.

 

How long does a polyaspartic garage floor coating take?

Most residential garages take 2 days. Day one is surface prep, the epoxy basecoat and the flake broadcast. Day two is the clear polyaspartic topcoat. You can walk on the floor the day after we finish, and drive on it 48 hours after the install. We confirm exact times for your floor.

 

What does a polyaspartic floor coating cost?

A full flake garage floor with a polyaspartic topcoat typically runs $5.50 to $8.50 per square foot. A 450 square foot two-car garage typically runs $2,500 to $3,825. Projects start at $2,500. These are typical ranges, not quotes.

 

Get a Free Estimate

Call (201) 365-0003 or request a quote online for a free on-site estimate. We serve New Jersey, New York and Connecticut. See all of our service areas.

Gray flake epoxy garage floor with a clear polyaspartic topcoat in Greenwich, CT
bottom of page